Parts by Type

print This page

Transmission Yokes

Filters: SERIES = 1350,
PART NUMBER SERIES SPLINE COUNT SPLINE DIA. HUB DIA. HUB LENGTH C/L TO END C/L TO WASHER COUNTERBORE DIA. COUNTERBORE DEPTH VENTED JOINT ANGLE NOTES VEHICLE CLASS BRAND
5004083 1350 20/23 1.201 1.575 7.106 0.000 0.000 0.000 No 0 ### Captive to Dealer, Proprietary to Toyota ## LD Spicer
5016999 1350 20/23 1.230 1.575 7.106 0.000 0.000 0.000 No 0 ### Captive to Dealer, proprietary to Toyota ## LD Spicer
3-3-848X 1350 21 1.403 1.830 5.310 1.190 0.000 0.000 No 0 Hub dia. not ground LD Spicer
3503-220 1350 22 1.496 1.930 7.106 1.420 0.000 0.000 No 0 Toyota Tundra LD PTI
5016994 1350 22/32 1.533 1.930 7.106 0.000 0.000 0.000 No 0 ### Proprietary to Toyota ### LD Spicer
3503-231 1350 23 1.200 1.575 7.106 1.500 0.000 0.000 No 0 Toyota LD PTI
3-3-4281X 1350 26/27 1.176 1.500 6.938 1.250 1.218 0.410 Yes 0 LD Spicer
P3-3-4281X 1350 26/27 1.176 1.500 6.938 1.250 1.218 0.410 Yes 0 TH700 LD PTI
3503-270 1350 26/27 1.176 1.500 6.900 1.125 1.210 0.385 No 0 Forged yoke w/ induction heat treated hub,
 LD PTI
26013281 1350 26/27 1.176 1.500 6.938 0.000 1.210 0.472 No 0 GM LD AAM
20877209 1350 26/27 1.176 1.500 6.938 1.125 1.210 0.385 Yes 0 Cast & Nickel plated LD AAM
40035478 1350 26/27 1.176 1.425 6.931 1.125 1.210 0.385 No 0 LD AAM
T3-3-6081HP 1350 26/27 1.176 1.500 5.469 0.906 0.000 0.000 No 25 TH350 / Forged Chromoly / Black Oxidized LD PTI
T3-3-4281HP 1350 26/27 1.176 1.500 6.938 1.250 1.218 0.410 Yes 0 TH700 / Forged Chromoly / Black Oxidized LD PTI
T3-3-6081H 1350 26/27 1.176 1.500 5.810 0.906 0.000 0.000 No 25 Fits Powerglide with roller bearing tail housing and is Forged from Chromoly and Black Oxidized. LD PTI
3503-271 1350 26/27 1.176 1.500 6.900 1.125 1.210 0.385 Yes 0 Forged yoke w/ induction heat treated hub,
 LD PTI
P3-3-6081X 1350 26/27 1.176 1.500 5.469 0.906 0.000 0.000 No 25 TH350 LD PTI
3503-281 1350 27/28 1.220 1.500 6.625 0.875 0.000 0.000 No 0 LD PTI
3503-282 1350 27/28 1.220 1.600 6.625 0.875 0.000 0.000 No 0 LD PTI
T3-3-14061HP 1350 27/28 1.220 1.600 6.630 1.000 0.000 0.000 No 0 Ford 4R70W/4R75 / Forged Steel / Black Oxidized LD PTI
T3-3-8251HP 1350 27/28 1.220 1.500 6.500 0.875 0.000 0.000 No 0 C4 / Forged Steel / Black Oxidized LD PTI
3-3-6501X 1350 27/28 1.220 1.597 6.940 0.000 0.000 No LD Spicer
3503-286TO 1350 27/28 1.220 1.600 6.000 7.930 1.000 1.300 2.400 Yes Take Out, Has Dampner 4.770" OD LD PTI
3503-286 1350 27/28 1.220 1.600 6.000 7.930 1.000 1.300 2.400 Yes No Damper, Ford 4R70/4R75 LD PTI
3-3-3931X 1350 29/30 1.326 1.681 6.630 1.190 0.000 0.000 No 0 Fits Viper LD Spicer
3-3-2491X 1350 30/31 1.391 1.685 6.440 1.190 0.000 0.000 No 0 C6 LD Spicer
3-3-5431X 1350 30/31 1.391 1.886 7.312 1.190 0.000 0.000 No 0 LD Spicer
3-3-5861X 1350 30/31 1.391 1.886 7.460 1.030 0.000 0.000 No 0 C.V. Yoke / Nickel Plated LD Spicer
3-3-5961X 1350 30/31 1.391 1.685 4.500 6.570 1.190 0.000 0.000 No 0 LD Spicer
3503-312 1350 30/31 1.391 1.886 7.312 1.190 0.000 0.000 No 0 Ford 4R100, BW1345, BW1356, BW4406, BW4417, BW4418, BW4419, NP208 LD PTI
3503-31CV 1350 30/31 1.391 1.886 7.312 1.000 0.000 0.000 No 0 LD PTI
T3-3-5431HP 1350 30/31 1.391 1.886 7.312 1.190 0.000 0.000 No 0 Forged Chromoly / Black Oxidized LD PTI
T3-3-2491HP 1350 30/31 1.391 1.685 4.500 6.440 1.190 0.000 0.000 No 0 C6 / Forged Chromoly / Black Oxidized LD PTI
3503-311 1350 30/31 1.391 1.685 8.440 1.125 0.000 0.000 No 0 Full Spline LD PTI
3503-310 1350 30/31 1.391 1.685 8.250 1.125 1.435 0.875 No 0 Ford E4OD, 4R100 LD PTI
3503-313 1350 30/31 1.391 1.685 5.375 7.500 1.125 1.435 0.500 No 0 Ford Mustang LD PTI
3503-314 1350 30/31 1.391 1.685 4.50 6.570 1.250 0.000 0.000 No 0 C6 FULL SPLINE LD PTI
3503-315 1350 30/31 1.391 1.685 7.250 1.125 0.000 0.000 No 0 Full Spline LD PTI
3503-316 1350 30/31 1.391 1.685 6.000 1.125 0.000 0.000 No 0 Full Spline LD PTI
3503-323 1350 30/32 1.374 1.731 6.102 1.250 1.375 0.393 No 0 Nissan/Infiniti LD PTI
40070696 1350 30/32 1.378 1.886 7.874 1.250 0.000 0.000 No 0 GMI-700 LD AAM
40106885 1350 30/32 1.378 1.886 7.875 1.250 Yes LD AAM
3503-32 1350 31/32 1.378 1.886 5.830 8.000 1.250 0.000 0.000 No 0 TH400 208/241, nickel plated LD PTI
3503-32CV 1350 31/32 1.378 1.886 7.312 1.000 0.000 0.000 No 0 208/241 TC CV Yoke LD PTI
3-3-2431X 1350 31/32 1.378 1.886 5.500 1.190 0.000 0.000 No 20 Short TH400 LD Spicer
3-3-4261X 1350 31/32 1.378 1.886 6.938 1.250 0.000 0.000 Yes 0 LD Spicer
3-3-5551X 1350 31/32 1.378 1.886 7.940 1.190 1.430 0.220 No 0 TH400 used on transfer case. LD Spicer
3-3-5571X 1350 31/32 1.378 1.886 5.000 6.938 1.250 0.000 0.000 No 0 TH400 LD Spicer
3-3-6441X 1350 31/32 1.378 1.886 7.720 1.190 0.000 0.000 No 0 LD Spicer
3-3-6871X 1350 31/32 1.378 1.886 7.720 1.190 0.000 0.000 No 0 Nickel Plated LD Spicer
N3-3-2431X 1350 31/32 1.378 1.886 5.500 1.240 0.625 0.530 No 15 Short TH400, Counter bored LD Neapco
N3-23-9163X 1350 31/32 1.378 1.886 6.600 0.000 0.000 0.000 No 0 Transfer case flange slip. 3.125 male pilot x 4.250 bolt circle, 6.600 face to end LD Neapco
3503-324 1350 31/32 1.378 1.886 5.594 1.000 1.416 0.390 No 0 Replaces 3-4-13211-1 which was a bolt-on. This part has a welch plug that can be removed to make it a bolt on. Use with strap kit 3570-20. LD PTI
N3-3-9467X 1350 31/32 1.378 1.886 7.880 1.310 0.000 0.000 No 0 Full spline LD Neapco
3503-320 1350 31/32 1.378 1.886 6.938 1.250 0.000 0.000 Yes 0 TH400 208/241 LD AAM
3-3-6481X 1350 31/32 1.378 1.886 6.938 1.125 0.000 0.000 Yes 0 LD Spicer
5010279 1350 31/32 1.378 1.886 8.732 1.100 0.000 0.000 No 0 ### Proprietary to Chrysler ###, see 3503-3204 LD Spicer
3503-326 1350 31/32 1.378 1.886 5.500 1.250 0.000 0.000 No 0 Same as Dana 3-3-2431X LD PTI
T3-3-2431HP 1350 31/32 1.378 1.886 5.500 1.190 0.000 0.000 No 20 Short TH400 / Forged Chromoly / Black Oxidized LD PTI
T3-3-5571HP 1350 31/32 1.378 1.886 5.000 6.938 1.250 0.000 0.000 No 0 Short TH400 / Forged Chromoly / Black Oxidized LD PTI
T3-3-5551HP 1350 31/32 1.378 1.886 7.940 1.190 1.430 0.220 No 0 This 1350 Yoke is Forged from Chromoly and Black Oxidized. LD PTI
3503-325 1350 31/32 1.378 1.886 5.500 1.321 1.475 0.510 No 0 Black Anodized LD PTI
3503-329 1350 31/32 1.378 1.886 6.938 1.250 0.000 0.000 No 0 TH400 LD PTI
3503-3201 1350 31/32 1.378 1.886 4.823 6.938 1.250 0.000 0.000 Yes 0 TH400 LD PTI
3503-3202 1350 31/32 1.378 1.886 8.000 1.250 0.000 0.000 Yes 0 TH400 208/241 (HAS VENT HOLE) LD PTI
3503-3203 1350 31/32 1.378 1.886 7.500 1.250 0.000 0.000 No 0 TH400 (GM 32 spline), Ford T-case LD PTI
3503-3204 1350 31/32 1.378 1.886 5.5 8.750 1.250 0.000 0.000 No 0 Stepped surface after hub diameter LD PTI
3503-3206 1350 31/32 1.378 1.886 3.700 5.827 1.250 0.000 0.000 No 0 LD PTI
T3-3-2431CBHP 1350 32 1.378 1.866 5.500 1.190 0.625 0.530 No 20 Short TH400 / Forged Chromoly / Black Oxidized LD PTI
T3-3-2431CBH 1350 32 1.378 1.888 3.800 5.500 1.190 0.625 0.530 No 20 For Roller Bearing Tail housing TH400 or 4L80E LD PTI
3-3-7141X 1350 32/34 1.406 1.770 8.465 1.250 0.000 0.000 No 0 Nissan Titan, Armada / Same as 5002464 which is Proprietary to Nissan LD Spicer
3503-341 1350 32/34 1.406 1.770 8.465 1.250 0.000 0.000 No 0 Nissan Titan 4x4 TX15A LD PTI